cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
lalithkumar
Adventurer
Adventurer
1,703 Views
Registered: ‎06-16-2016

How to enable speed up simulation by d SIM_SPEED_UP

Jump to solution

Hi all,

I'm using 10/25g Mac and To better understanding try to simulate example design . but its taking more time .

and I have seen the option  to  speed up simulation in internal code . but I don't know how to enable it .

can any one tell where should I add this "-d SIM_SPEED_UP " in simulation.

thank you.

0 Kudos
1 Solution

Accepted Solutions
nanz
Moderator
Moderator
1,834 Views
Registered: ‎08-25-2009

Hi @lalithkumar,

 

This "-d SIM_SPEED_UP" should be added to the simulation settings in Vivado:

 

Capture.JPG


-------------------------------------------------------------------------------------------

Don’t forget to reply, kudo, and accept as solution.

If starting with Versal take a look at our Versal Design Process Hub and our Versal Blogs and our Versal Ethernet Sticky Note.

-------------------------------------------------------------------------------------------

View solution in original post

1 Reply
nanz
Moderator
Moderator
1,835 Views
Registered: ‎08-25-2009

Hi @lalithkumar,

 

This "-d SIM_SPEED_UP" should be added to the simulation settings in Vivado:

 

Capture.JPG


-------------------------------------------------------------------------------------------

Don’t forget to reply, kudo, and accept as solution.

If starting with Versal take a look at our Versal Design Process Hub and our Versal Blogs and our Versal Ethernet Sticky Note.

-------------------------------------------------------------------------------------------

View solution in original post