cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Participant
Participant
344 Views
Registered: ‎12-31-2018

is SGMII LVDS supported in ZYNQ Z-7007S and Z-7010 -2 devices

Jump to solution

I have a customer that would like to use the 1G/2.5G Ethernet PCS/PMA or SGMII v16.1 IP  with LVDS in a small ZYNQ device.

According to PG047 table 3-2 XC7Z010/XC7Z020 in speed grade -2 are supported. Is this supported in the CLG225 package ?

Although the XC7Z007S is not specified in table 3-2, can the IP be targeted to this device is -2 speed grade also ?

They are looking for a small footprint and want to implement this IP.

Thanks for your help.

 

 

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
304 Views
Registered: ‎11-09-2017

Re: is SGMII LVDS supported in ZYNQ Z-7007S and Z-7010 -2 devices

Jump to solution

Hi

XC7Z007S CLG225  speed grade -2 supports SGMII over LVDS.

You can check same in vivado select your FPGA device, add IP from IP catalog and check configuration.

 

Regards
Pratap

Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful.

View solution in original post

2 Replies
Highlighted
Moderator
Moderator
305 Views
Registered: ‎11-09-2017

Re: is SGMII LVDS supported in ZYNQ Z-7007S and Z-7010 -2 devices

Jump to solution

Hi

XC7Z007S CLG225  speed grade -2 supports SGMII over LVDS.

You can check same in vivado select your FPGA device, add IP from IP catalog and check configuration.

 

Regards
Pratap

Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful.

View solution in original post

Highlighted
Participant
Participant
294 Views
Registered: ‎12-31-2018

Re: is SGMII LVDS supported in ZYNQ Z-7007S and Z-7010 -2 devices

Jump to solution

Thank you for confirming !

0 Kudos