UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer jialf521
Observer
423 Views
Registered: ‎06-02-2018

ZCU102 board Si5341 reprogram

Jump to solution

Hi

    The Si5341 on my ZCU102 board cannot work and I replaced it.How do you reprogram the (U69) SI5341B chip on the ZCU102 development board, or through what software can you access the chip.

Thank you 

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
374 Views
Registered: ‎06-06-2018

Re: ZCU102 board Si5341 reprogram

Jump to solution

Hi @jialf521,

The Si5341/40 can be quickly and easily configured using ClockBuilderPro software. Custom part numbers are automatically assigned using a ClockBuilder Pro™ for fast, free, and easy factory pre-programming or the Si5341/40 can be programmed via I2C and SPI serial interfaces.

Please contact Silabs https://www.silabs.com for more information regarding this.

Regards,

Deepak D N

---------------------------------------------------------------------------------

Please reply or Give Kudos or mark it as an Accepted Solution.

--------------------------------------------------------------------------------------

0 Kudos
5 Replies
Xilinx Employee
Xilinx Employee
408 Views
Registered: ‎06-06-2018

Re: ZCU102 board Si5341 reprogram

Jump to solution

Hi @jialf521,

through SCUI you can set the clock frequency of SI5341B. refer XTP433 for more information. and also download SCUI Files.

regards,

Deepak D N

----------------------------------------------------------------------------------------

Please reply or give kudos or mark it as a accepted solution.

------------------------------------------------------------------------------------------

0 Kudos
Observer jialf521
Observer
398 Views
Registered: ‎06-02-2018

Re: ZCU102 board Si5341 reprogram

Jump to solution

Thank you @ddn

   Could you tell me more about it? I did not find a way to program SI5341B while using SCUI.

thanks

 

0 Kudos
Highlighted
Observer jialf521
Observer
394 Views
Registered: ‎06-02-2018

Re: ZCU102 board Si5341 reprogram

Jump to solution

SGUI.PNG

0 Kudos
Observer jialf521
Observer
383 Views
Registered: ‎06-02-2018

Re: ZCU102 board Si5341 reprogram

Jump to solution

Thank you @ddn

     In SGUI, I can only set the output frequency of SI570 and SI5328.How to program SI5341 is also not covered in XTP433.

Thanks

0 Kudos
Xilinx Employee
Xilinx Employee
375 Views
Registered: ‎06-06-2018

Re: ZCU102 board Si5341 reprogram

Jump to solution

Hi @jialf521,

The Si5341/40 can be quickly and easily configured using ClockBuilderPro software. Custom part numbers are automatically assigned using a ClockBuilder Pro™ for fast, free, and easy factory pre-programming or the Si5341/40 can be programmed via I2C and SPI serial interfaces.

Please contact Silabs https://www.silabs.com for more information regarding this.

Regards,

Deepak D N

---------------------------------------------------------------------------------

Please reply or Give Kudos or mark it as an Accepted Solution.

--------------------------------------------------------------------------------------

0 Kudos