UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Participant tasker.j
Participant
409 Views
Registered: ‎10-23-2018

ZCU111 RFSoc TRD - LVM File Version Error

Jump to solution

Hi,

I'm trying to load a LVM file that I created using lab view to the DAC for playback, but I'm getting a "File Version not compatible:" error when I load the file.  Screen shot of error is below and the lvm file I am loading is attached.  Thanks in advance.

rfdc_gui_lvm_error.jpg

Tags (4)
0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
352 Views
Registered: ‎10-19-2011

Re: ZCU111 RFSoc TRD - LVM File Version Error

Jump to solution

Are you using a converter, or just a direct export for the LVM file? Below is a guide on the LVM format and working with our TRD tool.

 

http://www.xilinx.com/support/answers/71687.htm

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
3 Replies
Moderator
Moderator
353 Views
Registered: ‎10-19-2011

Re: ZCU111 RFSoc TRD - LVM File Version Error

Jump to solution

Are you using a converter, or just a direct export for the LVM file? Below is a guide on the LVM format and working with our TRD tool.

 

http://www.xilinx.com/support/answers/71687.htm

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
Participant tasker.j
Participant
344 Views
Registered: ‎10-23-2018

Re: ZCU111 RFSoc TRD - LVM File Version Error

Jump to solution

Hi @travisc,

Thanks for the reply but unfortunately I've already spent some time reviewing the provided link and have verified that the attached lvm file matches the settings in the provided document ("RF Data Converter Evaluation GUI file support".

I'm exporting the information directly from LabView in the LVM format. Any other ideas? What versioning is the GUI checking to get this error? Or is this just a general error with the file format?  

Thanks again as I am still searching for a solution.

-Jim

0 Kudos
Participant tasker.j
Participant
329 Views
Registered: ‎10-23-2018

Re: ZCU111 RFSoc TRD - LVM File Version Error

Jump to solution

HI again @travisc,

I re-read the link that you sent and the documents and found that the file had to have a Version of 1.2.0 in the special header section.  It now works as expected.  Thank you for your time.

0 Kudos