cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
84 Views
Registered: ‎02-13-2020

Choose Alternative Flash for Different Vivado Version

Jump to solution

I used Vivado 2014.4 to program the firmware, and I choose N25Q256 (The flash on the board is actually MT25Q256), as there is no MT25Q256 in the list of Vivado 2014.4, and it works.

In Page 333 of UG908 (V2020.1), these two flash are equivalent.

spencer_123_1-1600126838182.png

Is it safe to do like this?

Is it safe to program the firmware generated from an old Vivado version (2014.4 for example) with the latest Vivado version (2020.1 for example)?

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
44 Views
Registered: ‎06-05-2013
Yes. It is safe to use the suggested part. Refer to the following AR https://www.xilinx.com/support/answers/68566.html
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

1 Reply
Highlighted
Moderator
Moderator
45 Views
Registered: ‎06-05-2013
Yes. It is safe to use the suggested part. Refer to the following AR https://www.xilinx.com/support/answers/68566.html
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post