05-10-2020 06:33 AM
I won BASYS 3 and i wanted to connect pmod encoder to my JC pin 1 to 6, but when i generate the bitstream
i get this error:
05-10-2020 07:09 AM
The messages are telling you that two of your IO signals are not assigned to pins of the FPGA and two signals, probably the same ones, do not have an IO standard assigned. The Placer report will tell you what IO signals are assigned to which locations and what IO standards you have assigned to them. An asterisk (*) will tell you that no value was assigned by you and these are the signals you need to add to your xdc file.