UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
4,777 Views
Registered: ‎10-14-2017

SPI NOR FLASH MT25Q not listed in Impact 14.7

Jump to solution

Hi everyone, 

 

I'm currently working with this Flash memory  MT25QL128ABA  which is the memory family of Micron. I was going to program the Flash memory using Impact 14.7 but I was not able to select the appropriate memory because it is not listed in the software.

 

Based on Micron supported memory, MT25Q 128Mb is supported in ISE 14.7 by selecting N25Q128 in iMPACT, but It is not listed in the software.

 

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwjJuf2rgfHWAhVB7yYKHTZQBL8QFggnMAA&url=https%3A%2F%2Fwww.micron.com%2F~%2Fmedia%2Fdocuments%2Fproducts%2Fother-documents%2Fxilinx_compatibility_guide.pdf&usg=AOv...

 

How can I program this memory using the software 14.7, in the FPGA virtex-5?

xilinx flash memory 14.7.JPG
Micron.JPG
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
6,625 Views
Registered: ‎04-12-2017

Re: SPI NOR FLASH MT25Q not listed in Impact 14.7

Jump to solution

Hello @alebermudez94,

 

You can try programming the device by selecting M25P128 and skip id code check workaround.

How to skip ID code check

 

Following is the snapshot showing how the skip idcode environment variable has to be applied for impact tool

 skip.PNG

After setting up this please try programming the flash.

Please give us feedback about this.

 

Thank you.

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

3 Replies
Highlighted
Moderator
Moderator
6,626 Views
Registered: ‎04-12-2017

Re: SPI NOR FLASH MT25Q not listed in Impact 14.7

Jump to solution

Hello @alebermudez94,

 

You can try programming the device by selecting M25P128 and skip id code check workaround.

How to skip ID code check

 

Following is the snapshot showing how the skip idcode environment variable has to be applied for impact tool

 skip.PNG

After setting up this please try programming the flash.

Please give us feedback about this.

 

Thank you.

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

4,659 Views
Registered: ‎10-14-2017

Re: SPI NOR FLASH MT25Q not listed in Impact 14.7

Jump to solution

Hi @kvasantr 

 

Thanks a lot for your support.

 

I was able to program the flash memory MT25Q using M25P128 that is listed.

 

 

2.JPG
0 Kudos
Newbie isela
Newbie
3,147 Views
Registered: ‎07-02-2018

Re: SPI NOR FLASH MT25Q not listed in Impact 14.7

Jump to solution
Hi,

Can this be done in Vivado ?

Itsik
isra-juk@zahav.net.il
0 Kudos