UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Participant hacmachdien
Participant
3,363 Views
Registered: ‎04-04-2013

Xilinx Graphical Design Interface

Jump to solution

First of all, I want to declare that I'm a complete noob when it comes to VHDL design because of this I wonder if I can work with VHDL files using graphical blocks to connect differentt modules together. I overheard somewhere that I can use Vivado design suite for this kind of design methodology, am I correct with this one? 

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
4,526 Views
Registered: ‎07-11-2011

Re: Xilinx Graphical Design Interface

Jump to solution

Hi,

 

If you are referring Schematic Editor like in ISE you don't have it in VIvado.

http://forums.xilinx.com/t5/Design-Entry/Schematic-Design-Entry-Tool-in-Vivado/td-p/278260

 

For Vivado design entry method please refer below UG

http://www.xilinx.com/support/documentation/sw_manuals/xilinx2012_3/ug895-vivado-system-level-design-entry.pdf

 

You can also  build a System in Vivado using blocks in IPI.

http://www.xilinx.com/support/documentation/sw_manuals/xilinx2013_4/ug994-vivado-ip-subsystems.pdf

 

 

Hope this helps

 

Regards,

Vanitha

---------------------------------------------------------------------------------------------
Please do google search before posting, you may find relavant information.
Mark the post - "Accept as solution" and give kudos if information provided is helpful and reply oriented

View solution in original post

0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
4,527 Views
Registered: ‎07-11-2011

Re: Xilinx Graphical Design Interface

Jump to solution

Hi,

 

If you are referring Schematic Editor like in ISE you don't have it in VIvado.

http://forums.xilinx.com/t5/Design-Entry/Schematic-Design-Entry-Tool-in-Vivado/td-p/278260

 

For Vivado design entry method please refer below UG

http://www.xilinx.com/support/documentation/sw_manuals/xilinx2012_3/ug895-vivado-system-level-design-entry.pdf

 

You can also  build a System in Vivado using blocks in IPI.

http://www.xilinx.com/support/documentation/sw_manuals/xilinx2013_4/ug994-vivado-ip-subsystems.pdf

 

 

Hope this helps

 

Regards,

Vanitha

---------------------------------------------------------------------------------------------
Please do google search before posting, you may find relavant information.
Mark the post - "Accept as solution" and give kudos if information provided is helpful and reply oriented

View solution in original post

0 Kudos