cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
samarawickrama
Adventurer
Adventurer
5,773 Views
Registered: ‎09-04-2011

Zynq ZC702 Evaluation Board : bare-metal ETHERNET implementation ...

Hi,

 

1) In Zynq ZC702 Evaluation Board, what are the possible methods to transfer BRAM data to PC via ETHERNET?


2) Is there any ARM bare-metal C programme available to transfer data from Zynq ZC702 Evaluation Board to PC via ETHERNET?


3) Is there any SDK ARM C library available for Ethernet implementation (to send data) on Zynq ZC702 Evaluation Board?


Thank you.

0 Kudos
3 Replies
rvijay435
Newbie
Newbie
5,100 Views
Registered: ‎11-14-2013

>> Hi,

 >> 

>> 1) In Zynq ZC702 Evaluation Board, what are the possible methods to transfer BRAM data to PC via ETHERNET?

>> 
>> 2) Is there any ARM bare-metal C programme available to transfer data from Zynq ZC702 Evaluation Board to PC via >> ETHERNET?

>> 
>> 3) Is there any SDK ARM C library available for Ethernet implementation (to send data) on Zynq ZC702 Evaluation >> Board?

>> 
>> Thank you.

 

 

 

Hi, I am facing the same problem now.

Please get to me if you got the solution.

Urs
Vijay Kishore
0 Kudos
muzaffer
Teacher
Teacher
5,091 Views
Registered: ‎03-31-2012

You can write a simple AXI slave to connect the BRAM to PS and then implement LWIP for networking support. Then you can send the data available through the AXI over the network to the PC.
- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
0 Kudos
sampatd
Scholar
Scholar
5,062 Views
Registered: ‎09-05-2011

Hi, 

 

You can refer to the following application note:

http://www.xilinx.com/support/documentation/application_notes/xapp1026.pdf

 

Regards,

Tags (1)
0 Kudos