UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
1,701 Views
Registered: ‎03-25-2010

prog from Impact OK, from SDK failed.

Hello,

 

 

I have a custom board with 3 devices in the chain : Sysace, Virtex5 and Virtex6.

 

Using Impact I am able to program each one of the FPGAs, but, from the SDK I cannot program any of my FPGAs (with little EDK systems created using the wizard).

 

I have already modified the download.cmd file. In the case of the V6, it is the component # 3 in the JTAG chain (I saw it in Impact).

 

 

So my download.cmd  file is :

setMode -bscan

setCable -p

auto identify

assignfile -p 3 -file implementation/download.bit

program -p 3

quit

 

 

 

Error message:

"FPGA configuration encountered errors. Program FPGA failed    ERROR: Connection to Board Failed

Failed to Open JTAG Cable     Cable target is not connected to the host "

 

 

Am I missing something?

 

 

Regards,

 

delbotero

0 Kudos