UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
545 Views

ISE 14.7 PCI core not generated

Jump to solution

Dear all,

My customer is having a problem with ISE 14.7.

It doesn't generate the core for the PCI.

Attached you will find:

1. the warning about the NGC not generated;

2. the error after he tries to generate the core;

3. the files generated;

 

The license is ok and activated and the Spartan3 is supported.

 

Part Number : XC3S1000-4FG456

 

Can you help me ?

Thanks in advance.

 

Best regards,
Andrea

 

 

PCIE 32 img.png
PCIE 32 imgprj.png
PCIE 32 imgFILEGEN.png
0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
483 Views

回复: ISE 14.7 PCI core not generated

Jump to solution

Hmm, this is interesting. Normally a file with .ngo extension will be generated.

If licensing is not a problem, please try renaming either of the .bought file to "pci_lc_i.ngo". Then set the -sd option in ngdbuild and re-run the flow.

 

It would be best to cross check the IP generation @PCI board.

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
8 Replies
Xilinx Employee
Xilinx Employee
514 Views

回复: ISE 14.7 PCI core not generated

Jump to solution

This question should be posted to Implementation board since the failure is in Translate phase.

This is typically caused by the IP netlist not found. You need to open Translate properties dialog box and set the option "Macro Search Path" to point to where the IP output netlist .ngo is located.

 

The following AR addresses the topic:

https://www.xilinx.com/support/answers/10235.html

 

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
Adventurer
Adventurer
507 Views

回复: ISE 14.7 PCI core not generated

Jump to solution

Dear @graces

Sorry for posting my question in the wrong place.
Thanks anyway for the help.

 

We checked that not even the .ngo file is generated.



Best regards,
Andrea

0 Kudos
Xilinx Employee
Xilinx Employee
497 Views

回复: ISE 14.7 PCI core not generated

Jump to solution

You need to set the translate property "Macro Search Path" (-sd) to <path>/verilog/src/xpci, and re-implement.

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
Adventurer
Adventurer
491 Views

回复: ISE 14.7 PCI core not generated

Jump to solution

Dear @graces,

One of the problems has been resolved thanks to the first answer but about the file .ngo we still have some problems.

 

I'm sorry tell you again that the file .ngo is not generated.

Attached you will find a screenshot of what we got.

 

Our customer told us that it should generate one file named "pci_lc_i.ngo"

 

Not the 3 pci_lc_i.ngo.xxx but just 1.

 

Thanks in advance for the help.

Best regards,

Andrea

 

 

 

PCIE 32 imgFILEGEN.png
0 Kudos
Xilinx Employee
Xilinx Employee
484 Views

回复: ISE 14.7 PCI core not generated

Jump to solution

Hmm, this is interesting. Normally a file with .ngo extension will be generated.

If licensing is not a problem, please try renaming either of the .bought file to "pci_lc_i.ngo". Then set the -sd option in ngdbuild and re-run the flow.

 

It would be best to cross check the IP generation @PCI board.

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
Adventurer
Adventurer
468 Views

回复: ISE 14.7 PCI core not generated

Jump to solution

Dear @graces,
Thanks a lot for the help.
The problem is now fully resolved.

 

Maybe you even know why the file was not generated immediately at the beginning?

Even one of your assumptions is fine, it is not critical as a question since the problem has been solved.

 

Best regards,
Andrea

0 Kudos
Xilinx Employee
Xilinx Employee
430 Views

回复: ISE 14.7 PCI core not generated

Jump to solution

Glad to hear you can move on.

I'm not sure why no .ngo file was generated directly for this particular IP. I'd suggest that you post @PCI Express board if you would like to double check the IP output file.

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
Adventurer
Adventurer
410 Views

回复: ISE 14.7 PCI core not generated

Jump to solution
Okey, thank you.

Best regards,
Andrea
0 Kudos