UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Reply

[Common 17-345] A valid license was not found for feature 'Synthesis' and/or device 'xcvu9p-es1

Accepted Solution Solved
Highlighted
Observer
Posts: 34
Registered: ‎10-24-2008
Accepted Solution

[Common 17-345] A valid license was not found for feature 'Synthesis' and/or device 'xcvu9p-es1

I've downloaded a sample design which is set to use the XCVU9P part. I've got a valid license for it, but Vivado is refusing to run. I've seen other posts, and it seems to point to the use of Vivado_HLS vs Vivado. I believe my license is for Vivado.

Screenshot.png

Screenshot-1.png

 

Screenshot.png
Screenshot-1.png

Accepted Solutions
Observer
Posts: 34
Registered: ‎10-24-2008

Re: [Common 17-345] A valid license was not found for feature 'Synthesis' and/or device 'xcvu9p-es1

I was able to identify the problem. I had to run the application as root as Vivado couldn't see the boards otherwise. However, the license was installed as another user. When Vivado looked for the license, it didn't see it. I ran the license manager as root and reran Vivado. It now works.

View solution in original post


All Replies
Moderator
Posts: 94
Registered: ‎05-31-2017

Re: [Common 17-345] A valid license was not found for feature 'Synthesis' and/or device 'xcvu9p-es1

Hi @ccdoss,

 

As, you are targeting the design to Engineering Sample device (es1). I would suggest you to get the license of xcvu9p-es1.

 

Thanks & Regards,
A.Shameer.

Moderator
Posts: 2,326
Registered: ‎11-09-2015

Re: [Common 17-345] A valid license was not found for feature 'Synthesis' and/or device 'xcvu9p-es1

Hi @ccdoss,

 

You should change the project target to xcvu9p production silicon (not es1 or es2). Then it will work (it is harder to get an es1 silicon and this is unlikely that you will get it if you don't have an ES1 silicon).

 

Regards,

 

Florent

Florent
Product Application Engineer - Xilinx Technical Support EMEA
------------------------------------------------------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
Observer
Posts: 34
Registered: ‎10-24-2008

Re: [Common 17-345] A valid license was not found for feature 'Synthesis' and/or device 'xcvu9p-es1

I am not seeing an option to select a typical production part. It is either es1 or eval. When I specified eval before, I got the same error.

Observer
Posts: 34
Registered: ‎10-24-2008

Re: [Common 17-345] A valid license was not found for feature 'Synthesis' and/or device 'xcvu9p-es1

I was able to identify the problem. I had to run the application as root as Vivado couldn't see the boards otherwise. However, the license was installed as another user. When Vivado looked for the license, it didn't see it. I ran the license manager as root and reran Vivado. It now works.

Moderator
Posts: 2,326
Registered: ‎11-09-2015

Re: [Common 17-345] A valid license was not found for feature 'Synthesis' and/or device 'xcvu9p-es1

Hi @ccdoss,

 

Thank you for sharing your observations.

 

As the issue is fixed, could you mark this issue as solved by marking a response a solution?

 

Thanks,

 

Florent

Florent
Product Application Engineer - Xilinx Technical Support EMEA
------------------------------------------------------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.