cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Participant
Participant
781 Views
Registered: ‎05-16-2012

HBM IP example design with QuestaSim, read not working

Jump to solution

Hi All,

 

I am trying to build a design for XCVU37P-2 with HBM IP., Single Stack, no parity, using QuestaSim 10.7.

While running simulation, thre read address are accepted, but the read data (rvalid signal) is never received.

 

Kindly let me know if anyne has faced similar issue and how to proceed further.

 

Thanks,

Anup.

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
859 Views
Registered: ‎02-11-2014

Hello @anupkini,

 

Please look into the following AR to get Questasim working with the HBM Example Design: https://www.xilinx.com/support/answers/71097.html

 

Let me know if this does not solve your problem.

 

Thanks,

Cory

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

1 Reply
Highlighted
Moderator
Moderator
860 Views
Registered: ‎02-11-2014

Hello @anupkini,

 

Please look into the following AR to get Questasim working with the HBM Example Design: https://www.xilinx.com/support/answers/71097.html

 

Let me know if this does not solve your problem.

 

Thanks,

Cory

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post