cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
doohan93
Participant
Participant
189 Views
Registered: ‎03-04-2018

MIG Config issue on KC705

I configured mig7 on KC705 like belows..

 

noname_1.png

And i got [place 30-51] error like below..

noname_2.png

 


Plz let me know the root cause of [place 30-51] and resolution??

 

Thanks,

Doohan

0 Kudos
1 Reply
rpr
Moderator
Moderator
137 Views
Registered: ‎11-09-2017

Hi @doohan93 

Before the implementation, open the synthesized design and see the IO ports pin location is matched with board XDC.

Regards
Pratap

Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful.
0 Kudos