cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
1,108 Views
Registered: ‎03-31-2014

connecting custom memory controller to DDR4 Phy

Jump to solution

Hi,

From PG150 I understand that Xilinx MIG PHY is not DFI compliant. Hence the signals at the top level of phy only wrapper are not matching exactly with DFI interface ports. Also there are some additional control ports.

To connect the Xilinx PHY with custom controller, does Xilinx provide any guideline document to match the DFI compliant ports?

Any reference would be helpful.

Thanks,

Aj.

0 Kudos
Reply
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
1,074 Views
Registered: ‎11-28-2016

Hello @ajasan,

Xilinx doesn't have any documentation on how to connect our PHY with a DFI compliant interface.  You'll have to come up with a custom shim to do this.

View solution in original post

0 Kudos
Reply
2 Replies
Highlighted
Moderator
Moderator
1,075 Views
Registered: ‎11-28-2016

Hello @ajasan,

Xilinx doesn't have any documentation on how to connect our PHY with a DFI compliant interface.  You'll have to come up with a custom shim to do this.

View solution in original post

0 Kudos
Reply
Highlighted
Adventurer
Adventurer
1,034 Views
Registered: ‎03-31-2014

thanks for the reference.

I am referring to the same documents for interfacing.

 

Thanks.

0 Kudos
Reply