UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor elotb
Visitor
8,429 Views
Registered: ‎02-14-2015

Aurora 8b10b UFC problem

i am using ISE14.7, aurora_8b10b_v8_3, xc7k325t, 4X, 2.5G

i have two same board

i send data from board A to board B, use tx_tdata, tx_tvalid, tx_tkeep(always 16'hFFFF), tx_tlast(always 1'b0), tx_tready,

and receive data use rx_data, rx_tvalid. the data is correct!

but when i send ufc_data from board A to board B as follow:

1.png

ufc_tx_ms always 3'b111

tx_data is 0x12345678ABCDEF09

but cannot receive the same data

2.png

0 Kudos
6 Replies
Visitor elotb
Visitor
8,413 Views
Registered: ‎02-14-2015

Re: Aurora 8b10b UFC problem

tx_data is 128bits
ufc_tx_ms always 3'b111 means ufc_data is 16byte
Moderator
Moderator
8,406 Views
Registered: ‎02-16-2010

Re: Aurora 8b10b UFC problem

Can you confirm if warn_cc is asserted when you are sending UFC message?
------------------------------------------------------------------------------
Don't forget to reply, give kudo and accept as solution
------------------------------------------------------------------------------
0 Kudos
Visitor elotb
Visitor
8,361 Views
Registered: ‎02-14-2015

Re: Aurora 8b10b UFC problem

Thank you for your replay. I am sure the warn_cc is 1'b0.

0 Kudos
Moderator
Moderator
8,329 Views
Registered: ‎02-16-2010

Re: Aurora 8b10b UFC problem

If you can reproduce this in simulation, please share the simulation log (.wlf) by capturing all signals.
------------------------------------------------------------------------------
Don't forget to reply, give kudo and accept as solution
------------------------------------------------------------------------------
0 Kudos
Highlighted
Visitor elotb
Visitor
8,251 Views
Registered: ‎02-14-2015

Re: Aurora 8b10b UFC problem

simulation is all good.

0 Kudos
Newbie wumingyang
Newbie
3,654 Views
Registered: ‎01-07-2017

Re: Aurora 8b10b UFC problem

I have the same problem. Could you tell how to resolve?
0 Kudos