We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Showing results for 
Search instead for 
Did you mean: 
Observer sridevi123
Registered: ‎02-20-2015

Does Zynq(7045) MIO support MII PHY ethernet(TI's DP83848)


I am working on ZYNQ(7045) based custom Board. Ethernet (DP83848) is interfaced to zynq through MIO lines. Configured as MII.  I  am testing ethernet using Lwip echo server in SDK. I get the following print once I run lwip echo server.

-----lwIP TCP echo server ------

TCP packets sent to port 6001 will be echoed back
link speed for phy address 0: 100
DHCP Timeout
Configuring default IP of
Board IP:
Netmask :
Gateway :

TCP echo server started @ port 7

But when I try to ping  from PC I get destination host unreachable.

and when I checked  RX_DV/MII_MODE  during reset is high (should be low for MII). Is lwip echo server support DP83848?.

Please help me.


Thank you


0 Kudos