cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
577 Views
Registered: ‎03-04-2020

How to boot bare metal first and then Linux using OpenAMP/Libmetal

 

In the UG1186, all the demo are linux master and baremetal remotes.

I want to make bare metal to be master .

thanks a lot !

Tags (1)
0 Kudos
2 Replies
Highlighted
Moderator
Moderator
542 Views
Registered: ‎02-07-2018

HI @DBG 

Unfortunately we dont have support for bare metal(RPU) as Master & Linux(APU) as slave.

Let me know exact use case, if you really want to run the Bare metal before Linux it is possible, you can run it from fsbl itself then you can run the Linux.

 

Thanks & regards

Aravind

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

 

0 Kudos
Highlighted
Visitor
Visitor
481 Views
Registered: ‎03-04-2020


Thank you for reply !
Firstly, I want to run both bare metal and Linux on different cores, It doesn't matter if bare metal run on R5 or A53。
Secondly, I want bare metal to run as soon as possible. If I use Linux to boot the bare metal, it's too late.
0 Kudos