cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
800 Views
Registered: ‎11-02-2019

Openamp quick try on zcu102

Jump to solution

Hi!

I am trying to do the quick try with the pre-built images of a petalinux project, following the UG1186 (v2019.1). I get a kernel panic (I attach the prompt). I also tried to boot openamp from my petalinux-images (I added openamp.dtsi to device-tree.bbappend and system-user.dtsi, and allow openamp group in the project configuration). But I get the same kernel panic.

I have tried to extract the rootfs in another partition of the SD card but it did not work. I am new with Openamp and I am a little bit lost. ¿Could anyone help me with this issue?

Thank you!

Tags (3)
0 Kudos
Reply
1 Solution

Accepted Solutions
watari
Teacher
Teacher
699 Views
Registered: ‎06-16-2013

Hi alonsosara44@gmail.com 

 

Because you didn't set proper rootfs at linux argument, you ware facing this issue.

So, refer the followings to resolve your issue.

 

a) Using initramfs as rootfs.

Add initramfs into FIT image by proper tools. (mkimage or petalinux or other tools)

 

b) Using SD card as rootfs.

Add "rootfs=<proper device name>" on linux arcument by petalinux.

 

Best regards,

View solution in original post

0 Kudos
Reply
4 Replies
jovitac
Moderator
Moderator
713 Views
Registered: ‎05-10-2017

At u-boot prompt could you please try this command instead. I believe the doc was not updated but this command is in our wiki

ZynqMP> bootm $netstart $netstart 0x14000000

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Reply
watari
Teacher
Teacher
700 Views
Registered: ‎06-16-2013

Hi alonsosara44@gmail.com 

 

Because you didn't set proper rootfs at linux argument, you ware facing this issue.

So, refer the followings to resolve your issue.

 

a) Using initramfs as rootfs.

Add initramfs into FIT image by proper tools. (mkimage or petalinux or other tools)

 

b) Using SD card as rootfs.

Add "rootfs=<proper device name>" on linux arcument by petalinux.

 

Best regards,

View solution in original post

0 Kudos
Reply
642 Views
Registered: ‎11-02-2019

Hi @jovitac,

I have tried to use that command and I get another error (I attach it).

 

0 Kudos
Reply
636 Views
Registered: ‎11-02-2019

Hi @watari ,

That worked, thank you!

 

0 Kudos
Reply