cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Newbie
Newbie
4,349 Views
Registered: ‎01-25-2012

Kintex7 configuration

Can I use a platform flash device (xcf128) to configure the Kintex7 using Selectmap mode? The configuration guide suggests using a microprocessor or a CPLD between the Kintex7 and the memory device(s) but is this really necessary or can I just use an xcf128 device as I used to with spartan6 and Virtex FPGAs?

0 Kudos
2 Replies
Highlighted
Xilinx Employee
Xilinx Employee
4,338 Views
Registered: ‎06-12-2008

The XCF128X is not supported with the 7 series.

0 Kudos
Community Manager
Community Manager
4,091 Views
Registered: ‎07-23-2012

Hello,

 

The XCF128X flash is supported only with Virtex-5 or Virtex-6 devices and it si one of the unsupported flashes for 7-series.

 

 

-----------------------------------------------------------------------------------------------
Please mark the post as "Accept as solution" if the information provided answers your query/resolves your issue.

Give Kudos to a post which you think is helpful.
Flash_support.jpg
0 Kudos