SATA Bridge Slower - DMATp received from the Mother Board Side
Using ARTIX 7, I have been able to establish a SATA 2.0 bridge between the Mother board and HDD [1TB from Western Digital]. But I find that SATA Bridge is very slow i.e. I find 5MBps of transfer of speed in comparison to a standard bridge having a range of 50MBps to 100Mbps on SATA2.0 bridge.
All I could see on my chipscope was repeated error coming from motherboard side i.e. Motherboard issues DMATp and then R_ERR. However, the bridge persists. There is no R_ERR from the motherboard side however.
Can some one help me here on this one so that I could increase the bridge speed? Any information required I can provide. Support needed please!