cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Adventurer
Adventurer
3,857 Views
Registered: ‎11-04-2009

VC707 Xapp524

Hello,

 

I am trying to deserialize data from an ADC (FMC116 - 125MHz) using the Xapp524 application note.

 

At this time the only timing constraint applied is

 

NET "*BitClk_MonClkOut" TNM_NET = DCO2;
TIMESPEC TS_DCO2 = PERIOD "DCO2" 500 MHz HIGH 50%;

NET "*BitClk_MonClkOut" TNM_NET = DCO3;
TIMESPEC TS_DCO3 = PERIOD "DCO2" 500 MHz HIGH 50%;

 

For the two high speed clocks of the two 4 channels ADCs out of the four provided in FMC116.

 

While I am getting correct data from the 1st ADC the 2nd sometimes gives me instead of pattern "0011100011100011" the value "1100111000111000".

 

Do you have any recommendations about additional constraints that may i would have to use?

 

Regards,

 

Lefteris

0 Kudos
Reply
0 Replies