cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
362 Views
Registered: ‎02-26-2020

XC7Z030-1FBG676C : contradiction in footprint recommandation in UG1099 and UG865 (appendix A)

Jump to solution

Hi

We are creating the footprint for the XC7Z030-1FBG676C and we have found 2 documents with footprint recommandation for the FBG676 package in the ZYNQ documentations.

UG1099 and UG865.

Both documentations have different recommandations for the solder land and soldermask opening.

UG1099:Solder land --> 0.4mm Solder Mask opening--> .43mm

UG865: Solder land --> 0.53mm Solder Mask opening--> .63mm

We were wondering which one is the right one for this FPGA.

Thank you

Caroline

Tags (3)
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
265 Views
Registered: ‎07-23-2015

Re: XC7Z030-1FBG676C : contradiction in footprint recommandation in UG1099 and UG865 (appendix A)

Jump to solution

@carolinepaulin Stick to UG865 as that is meant for Zynq-7000.

I will check on the discrepancy and get back.

- Giri
--------------------------------------------------------------------------------------------------------------------
There's no such thing as a stupid question. Feel free to ask but do a quick search to make sure it ain't already answered.
Keep conversing, give Kudos and Accept Solution when you get one.
-----------------------------------------------------------------------------------------------------------------------

View solution in original post

3 Replies
Highlighted
Moderator
Moderator
266 Views
Registered: ‎07-23-2015

Re: XC7Z030-1FBG676C : contradiction in footprint recommandation in UG1099 and UG865 (appendix A)

Jump to solution

@carolinepaulin Stick to UG865 as that is meant for Zynq-7000.

I will check on the discrepancy and get back.

- Giri
--------------------------------------------------------------------------------------------------------------------
There's no such thing as a stupid question. Feel free to ask but do a quick search to make sure it ain't already answered.
Keep conversing, give Kudos and Accept Solution when you get one.
-----------------------------------------------------------------------------------------------------------------------

View solution in original post

Highlighted
Moderator
Moderator
237 Views
Registered: ‎09-18-2014

Re: XC7Z030-1FBG676C : contradiction in footprint recommandation in UG1099 and UG865 (appendix A)

Jump to solution

Hello Carolinepaulin,

where in ug1099 has recommendation for 1mm pitch for zynq?

 

Regards,

T

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
Highlighted
200 Views
Registered: ‎02-26-2020

Re: XC7Z030-1FBG676C : contradiction in footprint recommandation in UG1099 and UG865 (appendix A)

Jump to solution

Hi

 

in UG1099, there is information for the 1.00mm, FB package, both in mm and mils.

If UG1099 is no longer good for Zynq devices, please make sure it doesnt appear in the documentation list.  

We will use UG865 appendix A recommendation.

thank you.

0 Kudos