UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Contributor
Contributor
70 Views
Registered: ‎07-24-2009

Tandem with Zynq US+ bitstream load time

Jump to solution

PG213 (ver 1.3) has section "Calculating Bitstream Load Time for Tandem" with some examples of calculations for pure FPGA bitstreams (Virtex/Kintex devices). But Zynq US+ MPSoC devices have significantly different configuration subsystem. Is there any suggestions or examples relevant to MPSoC? Thank you.

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
33 Views
Registered: ‎01-15-2008

Re: Tandem with Zynq US+ bitstream load time

Jump to solution

check the following link which has an excel sheet to estimate the boot time in Zynq US+

https://www.xilinx.com/support/answers/67475.html

 

0 Kudos
1 Reply
Moderator
Moderator
34 Views
Registered: ‎01-15-2008

Re: Tandem with Zynq US+ bitstream load time

Jump to solution

check the following link which has an excel sheet to estimate the boot time in Zynq US+

https://www.xilinx.com/support/answers/67475.html

 

0 Kudos