cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Observer
Observer
6,440 Views
Registered: ‎03-09-2008

Unable to set speedgrade for a XC5VLC110T

Jump to solution

When using the Xilinx Core Generator I Cant set the speed grade for a XC5VLC110T.Why is that? Is there any solution yet?

The Xilinx ISE version I am using is 10.1.03

 

Message Edited by blueconfig on 09-27-2009 08:58 AM
0 Kudos
Reply
1 Solution

Accepted Solutions
Highlighted
Observer
Observer
7,631 Views
Registered: ‎03-09-2008
Apparently the XC5VLX110T is not supported by the webpack. So I needed a full version.

View solution in original post

0 Kudos
Reply
5 Replies
Highlighted
Professor
Professor
6,426 Views
Registered: ‎08-14-2007

Do you mean XC5VLX110T?  I have no problems setting speed grade for that.  XC5VLC110T doesn't match any

known part numbers.

-- Gabor
0 Kudos
Reply
Highlighted
Observer
Observer
6,424 Views
Registered: ‎03-09-2008

Yes indeed, It should be XC5VLX110T, Sorry.

Are you also using 10.1.03? I already tried to use an other package, but that didn't help.

 

0 Kudos
Reply
Highlighted
Professor
Professor
6,422 Views
Registered: ‎08-14-2007

I'm using 10.1.03 under Windows XP, sp2.  Under Coregen help --> about I see:

 

Release Version 10.1.03 (nt)

Application Version K.39

. . .

 

Updates Installed:

ISE 10.1 IP Update 1

ISE 10.1 IP Update 2

ISE 10.1 IP Update 3

 

Under Project Options I have:

 

Family: Virtex 5

Device: XC5VLX110T

Package: ff1136

Speed Grade: -1

 

I can change the speed grade to -2 or -3 with no problems.

 

HTH,

Gabor

-- Gabor
Highlighted
Observer
Observer
6,400 Views
Registered: ‎03-09-2008
I don't have the any of the service packs installed, so I will tried that first, when I am back at the campus.

Also, I have to point out that there is no speedgrade visible in the dropdown box. So it is imposable to select one. I have tried other devices, but they are ok.

When trying to generate a core, the generator gives this error: "ERROR:sim - Invalid command: SET speedgrade ="



Thanks for your response!
0 Kudos
Reply
Highlighted
Observer
Observer
7,632 Views
Registered: ‎03-09-2008
Apparently the XC5VLX110T is not supported by the webpack. So I needed a full version.

View solution in original post

0 Kudos
Reply