cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Contributor
Contributor
1,069 Views
Registered: ‎01-11-2018

error of Building the Zynq SW application (XSDK) of zynq pcie TRD

Hi:

I tried to build the SW app in XSDK of zynq pcie TRD.

I have followed the steps of zynq_PCIe_TRD_2015.4 and Qt & Qwt Build Instructions(Qt 5.4.2,Qwt6.1.2).

But when build the zynq_pcie_qt project I got the error from xsdk  as this :

 

6:23:55 **** Build of configuration Default for project zynq_pcie_qt ****
make all
arm-xilinx-linux-gnueabi-g++ -c -pipe -O3 -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -I. -I/opt/QT/include/QtGui -I/opt/QT/include/QtCore -Imoc -I/opt/QT/mkspecs/arm-xilinx-linux-gnueabi-g++ -o obj/mainwindow.o qt_app/mainwindow.cpp
In file included from qt_app/mainwindow.cpp:29:0:
qt_app/mainwindow.h:28:23: fatal error: QMainWindow: No such file or directory
#include <QMainWindow>
^
compilation terminated.
make: *** [obj/mainwindow.o] 错误 1

16:23:55 Build Finished (took 111ms)

 

 

And when I tried to fix the makefile of zynq_pcie_qt to find QMainWindow I got another "No such file or directory".

I am sure I have forgot something important, but I don't know!

 

0 Kudos
4 Replies
Contributor
Contributor
1,035 Views
Registered: ‎01-11-2018

Re: error of Building the Zynq SW application (XSDK) of zynq pcie TRD

One thing that I am not sure is that I use the arm-xilinx-linux-XXX tools of petalinux, not the XSDK, to build QT5 and qwt6.1.4 , should this cause problem?  If use XSDK's tools I don't know which folder should I export in linux?

0 Kudos
Highlighted
Contributor
Contributor
1,011 Views
Registered: ‎01-11-2018

Re: error of Building the Zynq SW application (XSDK) of zynq pcie TRD

Anything should be very helpful!

0 Kudos
Highlighted
Moderator
Moderator
988 Views
Registered: ‎12-04-2016

Re: error of Building the Zynq SW application (XSDK) of zynq pcie TRD

Hi @fujiajun

 

Could you please confirm if you are using 

 

 

Best Regards
Shabbir

0 Kudos
Highlighted
Contributor
Contributor
964 Views
Registered: ‎01-11-2018

Re: error of Building the Zynq SW application (XSDK) of zynq pcie TRD

Thank you for your reply.

I build and install the qt and qwt following this one:

Qt & Qwt Build Instructions (Qt 5.4.2, Qwt 6.1.2)

 

just because I use Qt5.4.2 and qwt6.1.2. 

 

And I gedit the make of zynq_pcie_qt project, I found Qwt lib is not included, it seems qmake does not know the qwt has been installed.

 

0 Kudos