cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
farzian
Adventurer
Adventurer
815 Views
Registered: ‎10-18-2014

zcu102 as an endpoint and zc706 as the root complex

Hi everybody,

Is it possible to configure zc706 as a root complex and connect it via the PCIe finger (PCIe edge) to zcu102 configured as endpoint?

Generally, Is it possible that the root complex node (the node with PCIe finger) connect to the endpoint (the node with PCIe slot) via PCIe finger (neither FMC  nor PCIe slot are our target to make the connection)?

 

Thanks,

Farzian

0 Kudos
Reply
2 Replies
venkata
Moderator
Moderator
751 Views
Registered: ‎02-16-2010

7-series PCI Express hard block can be configured as the Root port.

Regarding your other question, can you review the schematics of ZC706 and ZCU102?
------------------------------------------------------------------------------
Don't forget to reply, give kudo and accept as solution
------------------------------------------------------------------------------
0 Kudos
Reply
raphael.ponsard
Adventurer
Adventurer
724 Views
Registered: ‎09-05-2007

zcu102 can not be configured as end point, only root complex (hardware design)