The Zynq Technical Reference Manual says the following for the GPIO module: "The controller is clocked by the CPU_1x clock from the APB interface. All outputs and input sampling is done using the CPU_1x clock."
My first question is, are the MIO inputs to the GPIO module in the Zynq PS synchronized to the CPU_1x clock before they are sampled? If so, how are they synchronized? Is a standard dual flip-flop synchronizer used?
My second question is, if the GPIO inputs are not synchronized to the CPU_1x clock before sampling, how do I get access to the CPU_1x within the PL so that I can synchronize them myself?
