cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
amitlwaghmare
Contributor
Contributor
467 Views
Registered: ‎08-13-2017

Emacps example on zc706

hello everyone,

I have some questions about emacps driver,

1. By using emacps driver then, what our FPGA will be server or client?

2. I am trying to see the output on the Wireshark software but not able to see anything with ip address : 192.168.1.10, but on  UART terminal, it shows:

                                      Entering into main()
                                      Successfully ran Emacps intr dma Example

how to see the output on the Wireshark software for example?

 

 

thanks in advance,

Regards,

Amit

 

 

 

 

0 Kudos
1 Reply
ritakur
Xilinx Employee
Xilinx Employee
448 Views
Registered: ‎09-01-2014

if you are using the example of xemacps_example_intr_dma.c, it only uses PHY loopback.
if you want to see the output on the Wireshark, please try lwip example.
https://github.com/Xilinx/embeddedsw/tree/master/lib/sw_apps
0 Kudos