cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
amistad
Contributor
Contributor
731 Views
Registered: ‎09-28-2012

How to access the old version of document

Hi all 

I would like to know how to access the old version of document, ug585 for vivado 2016.2 specifically. 

https://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf

I could not find any link or information about how to access it. 

please show me clue.

thanks in advance

Sincerely

amistad

0 Kudos
5 Replies
florentw
Moderator
Moderator
700 Views
Registered: ‎11-09-2015

Hi @amistad 

For some document, if you seach on Xilinx, you will have the option to find different version of the UG/PG:UG900.JPG

 

It makes sense because they are specific to a vivado version because some commands are changing.

For the UG585, it does not makes sense to keep the previous version of the document. The document describe the silicon, which is not changing between versions. So each version will only be clarification or errors/typos fixed. So the latest version is always what you should look at.

Regards

 

 


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
amistad
Contributor
Contributor
694 Views
Registered: ‎09-28-2012

hi @florentw 

the document I need is UG585, and the search result shows there is no "see all versions" as what you show in the replication, UG900. 

aaa.jpg

 

 

 

 

 

 

 

So, how to access the old version of UG858? 

thanks 

amistad

0 Kudos
florentw
Moderator
Moderator
687 Views
Registered: ‎11-09-2015

Hi @amistad 

Please read my previous reply up to the end...


For the UG585, it does not makes sense to keep the previous version of the document. The document describe the silicon, which is not changing between versions. So each version will only be clarification or errors/typos fixed. So the latest version is always what you should look at.

 


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
amistad
Contributor
Contributor
681 Views
Registered: ‎09-28-2012

hi @florentw 

I encountered an issue for PS-SPI, which configuration does not work correctly as described in the UG585. 

cs2 is not pull-low when I set the CR for PS-SPI according to the UG585 while the cs0 and cs1 work correctly. 

I wounder if it is a XSDK version issue or something else. 

So, should I discuss this problem in another forum ?

thanks 

amistad

0 Kudos
florentw
Moderator
Moderator
665 Views
Registered: ‎11-09-2015

HI @amistad 

You might want to look of Answer Records or forums topics. You might find the answer.

My main recommendation would be to use the latest version of the tool ;)

Here is one AR you might want to look at: AR#58294

 


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos