cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Observer
Observer
387 Views
Registered: ‎03-27-2019

Picoblaze and jtag_loader for Spartan-7

I have been away from the Picoblaze for a while (Spartan 6 was the last project) and am now attempting to bring up a Picoblaze design on a Spartan-7 board (CMOD S7).  I'm running Vivado 2018.3 and have the ISE LabTools installed under Windows 10 64-bit.  The Picoblaze seems to be behaving as expected in design and the assembler seems to work as well.  I'm having problems getting the jtag_loader working for this design.  Has anyone been able to use the jtag loader for a Spartan-7 design under Windows 10?

Regards,

Michael

Tags (2)
0 Kudos
1 Reply
Highlighted
Observer
Observer
349 Views
Registered: ‎03-27-2019

I have reposted this on the Embedded Processor System Design forum. Please post any replies there:
https://forums.xilinx.com/t5/Embedded-Processor-System-Design/Picoblaze-and-JTAG-Loader-for-Spartan-7/td-p/955453
0 Kudos