cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
4,299 Views
Registered: ‎08-11-2010

Zynq Address Translation - Physical to Virtual

Hi,

 

I am working on ZC-706 board with vxWorks7 version.

The BSP that is provided from windriver does not have AXI ports (M_AXI_GP0, M_AXI_GP1) mapped in it.

The address range of the AXI ports is

0x40000000 to 0x7FFFFFFF,   0x80000000 to 0xBFFFFFFF.

 

The address mappings are given in a .dts file.

The similar kind of problem and solution is posted in the following link

http://forums.xilinx.com/t5/Embedded-Processor-System-Design/Zynq-Address-Translation-Physical-to-Virtual/m-p/312345#M7820

Probably the solution provided is for vxWorks 6.9.

 

How to add the AXI ports in .dts file

I am attaching the windriver provided .dts file in the attachment.

Please help me where and how to add.

 

Please help  me, Thanks in advance -- sriram

 

0 Kudos
Reply
1 Reply
Highlighted
Xilinx Employee
Xilinx Employee
4,205 Views
Registered: ‎08-02-2011

Have you seen the wiki which explains how to create a DTS?
http://www.wiki.xilinx.com/Build+Device+Tree+Blob
www.xilinx.com
0 Kudos
Reply