cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Contributor
Contributor
8,578 Views
Registered: ‎12-09-2015

zc706 lwip not working

Hi everyone,

                    I am new to zc706 evaluation board. I used to work with zedboard. I have worked with pl ethernet in zedboard before and it worked fine. Now I tried the same in zc706 but it is not working. I have selected the device correctly, checked the constraints file twice which is fine. Then generated the bitstream, exported it to sdk and selected lwip in application project. I have also changed the mac id in the code. But when I run it its not working. It is getting initialised and it is opening port 7, but it is not getting connected.

                  Anyone who have already done pl ethernet in zc706, please help me here. I have tested ps ethernet, which is working fine in zc706. Thanks in advance. Please let me know if there is any confusion in the question.

Regards

Karthik

0 Kudos
2 Replies
Highlighted
Contributor
Contributor
8,428 Views
Registered: ‎12-09-2015

Re: zc706 lwip not working

This is happening when i try to ping..

Any response will be appreciated...

Thanks

Karthik. R

error.jpg
0 Kudos
Highlighted
Visitor
Visitor
4,762 Views
Registered: ‎08-14-2016

Re: zc706 lwip not working

I meet the same problem, have you solved it? 

0 Kudos