06-02-2015 02:26 AM
I am trying to rebuild the XAPP794.I downloaded the design file from here.
I got errors which running TCL scripts.
More details can be found on this page.
06-02-2015 02:33 AM
@milan_mian what are those errors? please post vivado .log here
06-02-2015 03:21 AM - edited 06-02-2015 03:22 AM
06-02-2015 11:55 AM - edited 06-02-2015 11:55 AM
It's having trouble finding the repo containing the hardware for the VITA receiver.
Can you try reducing your path length where the project is stored?
06-02-2015 02:47 PM
06-02-2015 03:39 PM
06-03-2015 01:45 AM - edited 06-03-2015 01:46 AM
@bwiec. Hi, thanks a lot for your suggestion. The implementation ran much longer. Now, I encountered one more problem. The error is in from line 755 to 786
INFO: [Common 17-78] Attempting to get a license: Internal_bitstream
WARNING: [Common 17-301] Failed to get a license: Internal_bitstream
Parsing XDC File [C:/scripts/project/zvik_camera_2013.2.runs/impl_1/.Xil/Vivado-6424-W7-PI0598/dcp/design_1_wrapper_early.xdc]
Phase 0 | Netlist Checksum: 632963b4 read_checkpoint: Time (s): cpu = 00:00:59 ; elapsed = 00:01:00 . Memory (MB): peak = 1043.410 ; gain = 905.293 INFO: [Common 17-347] Attempting to get a license for feature 'Implementation' and/or device 'xc7z020' INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7z020' ERROR: [Common 17-69] Command failed: This design contains one or more evalution cores for which bitstream generation is not supported. while executing "write_bitstream -force design_1_wrapper.bit " INFO: [Common 17-206] Exiting Vivado at Wed Jun 03 10:39:02 2015...
Could you please me help on this?
06-03-2015 01:51 AM
@milan_mian run this tcl command in console of the design and share the result
06-03-2015 03:32 AM - edited 06-03-2015 03:33 AM
@milan_mian I see there are 7 IP's which has the license status design_linking.
you need the license for these cores to generate the bitstream.
06-03-2015 03:54 AM - edited 06-03-2015 03:54 AM
06-03-2015 04:08 AM
@milan_mian Attach your tcl command output here
report_environment -file (path)
06-03-2015 05:34 AM
Check if this AR is helpful
06-04-2015 02:01 AM
report_environment doesnt have license information. So share the file generated after following below steps:
1. Open Command Prompt
2. Navigate to Vivado installation directory (for example: C:\Xilinx\Vivado\2013.2\ids_lite\ISE\bin\nt64\)
3. run the command: xinfo
4. Share the generated xinfo.txt here.
06-04-2015 02:30 AM
06-04-2015 02:35 AM - edited 06-04-2015 02:37 AM
The reason for the licnese issue is "Hostid mismatch".
You had license with hostid: 864bf5aa1b1c but whereas your system's hostids are: 5c260a7dff6f,d0df9ab2d567,081196579365,081196579365,081196579364,005056c00001,005056c00008
To resolve the license issue, generate the IP license again with any of the system's hostids.