We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Showing results for 
Search instead for 
Did you mean: 
Visitor prakash_k
Registered: ‎10-26-2017

How to configure ddr for application

Hi ,

My Name is Prakash, i am using Zynq_7000 SOC board, the SW package Petalinux-2015.04


my HW board supports four modes:

1. operational mode.

2. Standby Mode.

3. Sleep mode 

4. Deep Sleep Mode.


when i am entering from Operational mode to Sleep mode and wake up from Sleep to operational mode then Some time DDR memory gets corrupted. (i am running the Test continuously ) .


My Question is :

1. when system waking up from Sleep to operational mode does DDR data gets initialized with default value?, if yes then

2. How can i configure DDR memory to use for special purpose (lets say i have to write 1k of data into some RAM address , then how can i confirue DDR so that no one can use this address)?


Please fill free to ask anything.







0 Kudos