UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer michaelellis
Observer
267 Views
Registered: ‎03-27-2019

Picoblaze and jtag_loader for Spartan-7

I have been away from the Picoblaze for a while (Spartan 6 was the last project) and am now attempting to bring up a Picoblaze design on a Spartan-7 board (CMOD S7).  I'm running Vivado 2018.3 and have the ISE LabTools installed under Windows 10 64-bit.  The Picoblaze seems to be behaving as expected in design and the assembler seems to work as well.  I'm having problems getting the jtag_loader working for this design.  Has anyone been able to use the jtag loader for a Spartan-7 design under Windows 10?

Regards,

Michael

Tags (2)
0 Kudos
1 Reply
Observer michaelellis
Observer
229 Views
Registered: ‎03-27-2019

Re: Picoblaze and jtag_loader for Spartan-7

I have reposted this on the Embedded Processor System Design forum. Please post any replies there:
https://forums.xilinx.com/t5/Embedded-Processor-System-Design/Picoblaze-and-JTAG-Loader-for-Spartan-7/td-p/955453
0 Kudos