cancel
Showing results for 
Search instead for 
Did you mean: 
Contributor
Contributor
572 Views
Registered: ‎07-24-2018

Stalls in Cyclic DMA to JESD204B TX

Jump to solution

I'm currently running an AXI DMA from PL DDR4 to a JESD204B IP Core configured for TX with an output of 245.76 MSPS (LMFS = 2441). My DMA is set up with Scatter-Gather in Cyclic Mode - in essence I'm transferring a signal stored in DDR4 in a looping manner. The signal output of my DAC (TI DAC38J84) however shows a few stalls between chunks of valid data that I suspect may be originating from the DMA. In my screen shots below, I seem to get 7.5 us of continuous data and a short 320-340 ns stall in between the chunks. What could be causing this stall in the output stream? 

 

 

lolze_3.png
lolze_4.png
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Contributor
Contributor
492 Views
Registered: ‎07-24-2018

Re: Stalls in Cyclic DMA to JESD204B TX

Jump to solution
0 Kudos
1 Reply
Highlighted
Contributor
Contributor
493 Views
Registered: ‎07-24-2018

Re: Stalls in Cyclic DMA to JESD204B TX

Jump to solution
0 Kudos