UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer c0ff331993
Observer
158 Views
Registered: ‎01-17-2019

SDSoC rebuilding ZCU-104-rv-ss-2018-2 Optical Flow application

Hi,

I am using SDSOC 2018.2 and downloaded the reVISION Optical Flow Application from https://github.com/Xilinx/reVISION-Getting-Started-Guide/blob/2018.2-tutorials/tool-flow-tutorials.md

As I was building the application using SDSOC 2018.2, I received:

===>The following messages were generated while creating FPGA bitstream. Log file:/home/sdsoc/Documents/zcu104-rv-ss-2018-2/workspaces/ws_of/aaa/Release/_sds/p0/vivado/vivado.log :
ERROR: [VPL 17-179] Fork failed: Cannot allocate memory
ERROR: [VPL 17-179] Fork failed: Cannot allocate memory
ERROR: [VPL 60-341] Hardware accelerator integration failed. Aborting build_system. The following log file is available for debugging '/home/sdsoc/Documents/zcu104-rv-ss-2018-2/workspaces/ws_of/aaa/Release/_sds/p0/vivado/vivado.log'. Contact your local Xilinx representative and provide the log file for further assistance.
ERROR: [VPL 60-806] Failed to finish platform linker
ERROR: [SdsCompiler 83-5019] Exiting sds++ : Error when calling '/home/sdsoc/Desktop/SDx/2018.2/bin/vpl --iprepo /home/sdsoc/Documents/zcu104-rv-ss-2018-2/workspaces/ws_of/aaa/Release/_sds/iprepo/repo --iprepo /home/sdsoc/Desktop/SDx/2018.2/data/ip/xilinx --platform /home/sdsoc/Documents/zcu104-rv-ss-2018-2/zcu104_rv_ss/zcu104_rv_ss.xpfm --temp_dir /home/sdsoc/Documents/zcu104-rv-ss-2018-2/workspaces/ws_of/aaa/Release/_sds/p0 --output_dir /home/sdsoc/Documents/zcu104-rv-ss-2018-2/workspaces/ws_of/aaa/Release/_sds/p0/vpl --input_file /home/sdsoc/Documents/zcu104-rv-ss-2018-2/workspaces/ws_of/aaa/Release/_sds/p0/.xsd/top.bd.tcl --target hw --save_temps --kernels read_optflow_input:w1_xf_DenseNonPyrLKOpticalFlow:write_optflow_output:adapter --webtalk_flag SDSoC --remote_ip_cache /home/sdsoc/Documents/zcu104-rv-ss-2018-2/workspaces/ws_of/ip_cache --xp "param:compiler.deleteDefaultReportConfigs=false" '
sds++ log file saved as /home/sdsoc/Documents/zcu104-rv-ss-2018-2/workspaces/ws_of/aaa/Release/_sds/reports/sds.log
ERROR: [SdsCompiler 83-5004] Build failed

makefile:45: recipe for target 'libaaa.so' failed
make: *** [libaaa.so] Error 1

Any Help please? Thank you.

Tags (2)
0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
107 Views
Registered: ‎08-20-2018

Re: SDSoC rebuilding ZCU-104-rv-ss-2018-2 Optical Flow application

Hi @c0ff331993 

Please provide below log

/home/sdsoc/Documents/zcu104-rv-ss-2018-2/workspaces/ws_of/aaa/Release/_sds/p0/vivado/vivado.log

Best Regards,
Nutan
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution
0 Kudos