UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer zxyglx_
Observer
1,020 Views
Registered: ‎05-06-2018

error while building CHaiDNN project on ZCU102

Jump to solution

Hi,

When I compile the program according to the steps described in the Creating SDx GUI Project.md file,the following error occurs. How can I solve it?

chaidnn.PNG

/home/lx/xilinx_dnn/CHaiDNN/src/design/conv/src/xi_convolution.hpp:1903:38: [ skipping 4 instantiation contexts, use -ftemplate-backtrace-limit=0 to disable ]

0 Kudos
1 Solution

Accepted Solutions
Adventurer
Adventurer
1,058 Views
Registered: ‎04-24-2012

Re: error while building CHaiDNN project on ZCU102

Jump to solution

Hi  @zxyglx_,

It is hard to tell you what could be wrong with just that picture. Whereas one could guess, as you are using the GUI mode, and because the compiler is showing 4 instantiation error contexts which are exactly the same as the 4 examples that came in the CHaiDNN, and those should not be compiled at the same time (which appears in the documentation), and therefore removing the other 3 sources could be the solution. It is still a vague guessing.

Please attach the log of your run, so we can see how we can help you in a better way.

 

Regards!

/* Don't forget to give kudos and/or accept as a solution */
0 Kudos
6 Replies
Adventurer
Adventurer
1,059 Views
Registered: ‎04-24-2012

Re: error while building CHaiDNN project on ZCU102

Jump to solution

Hi  @zxyglx_,

It is hard to tell you what could be wrong with just that picture. Whereas one could guess, as you are using the GUI mode, and because the compiler is showing 4 instantiation error contexts which are exactly the same as the 4 examples that came in the CHaiDNN, and those should not be compiled at the same time (which appears in the documentation), and therefore removing the other 3 sources could be the solution. It is still a vague guessing.

Please attach the log of your run, so we can see how we can help you in a better way.

 

Regards!

/* Don't forget to give kudos and/or accept as a solution */
0 Kudos
Observer zxyglx_
Observer
918 Views
Registered: ‎05-06-2018

Re: error while building CHaiDNN project on ZCU102

Jump to solution
The problem was solved,but other problems occur.Finally, CHaiDNN was built successfully using Makefiles.Thank you!
0 Kudos
Observer marie-laurie
Observer
912 Views
Registered: ‎05-16-2018

Re: error while building CHaiDNN project on ZCU102

Jump to solution

Hi @zxyglx_

 

How did you manage to solve them ? 

Thanks

 

ML

0 Kudos
Highlighted
Observer zxyglx_
Observer
906 Views
Registered: ‎05-06-2018

Re: error while building CHaiDNN project on ZCU102

Jump to solution

You can use Makefiles to build.However,memory consumption is very large when compiled.An error may occur due to insufficient memory.

0 Kudos
Observer marie-laurie
Observer
757 Views
Registered: ‎05-16-2018

Re: error while building CHaiDNN project on ZCU102

Jump to solution

Did you use makefiles to solve the skipping instanciations issues or to solve others issues you mentioned in a previous comment ? 

 

 

0 Kudos
Visitor q709505440
Visitor
478 Views
Registered: ‎11-04-2018

Re: error while building CHaiDNN project on ZCU102

Jump to solution
How did you solve this problem?

 }1_`$3D[19EPAO]2]J]X_4W.png

0 Kudos