UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor eunchong
Visitor
2,354 Views
Registered: ‎07-16-2017

IIBERT 7 via DisplayPort 1.2 Card

Jump to solution

Hi,

 

We are trying to do eys scan of IBERT IP, via this DisplayPort 1.2 Card.

http://solutions.inrevium.com/products/fmc/hpc/index.html

http://solutions.inrevium.com/products/pdf/TB_FMCH_DP3_HWUserManual_1.03e.pdf

 

It is possible ?

 

 

eunchong

 

0 Kudos
1 Solution

Accepted Solutions
Voyager
Voyager
4,065 Views
Registered: ‎06-24-2013

Re: IIBERT 7 via DisplayPort 1.2 Card

Jump to solution

Hey @eunchong,

 

It is possible?

I don't see a problem with an eye scan with this card, but note that you won't get the on-wire signal, as you are passing the data through the adaptive receiver equalizer of the SN65DP159.

 

Best,

Herbert

-------------- Yes, I do this for fun!
5 Replies
Voyager
Voyager
4,066 Views
Registered: ‎06-24-2013

Re: IIBERT 7 via DisplayPort 1.2 Card

Jump to solution

Hey @eunchong,

 

It is possible?

I don't see a problem with an eye scan with this card, but note that you won't get the on-wire signal, as you are passing the data through the adaptive receiver equalizer of the SN65DP159.

 

Best,

Herbert

-------------- Yes, I do this for fun!
Highlighted
Visitor eunchong
Visitor
2,313 Views
Registered: ‎07-16-2017

Re: IIBERT 7 via DisplayPort 1.2 Card

Jump to solution

Hi @hpoetzl,

 

 

Thanks your reply! We are glad to hear that we can do eye scan. BTW, are you using IBERT 7 series IP or DisplayPort IP? and can you use up-to 10 Gbps line late on Display Port?

 

 

eunchong

0 Kudos
Voyager
Voyager
2,310 Views
Registered: ‎06-24-2013

Re: IIBERT 7 via DisplayPort 1.2 Card

Jump to solution

Hey @eunchong,

 

Thanks your reply!

You're welcome!

 

BTW, are you using IBERT 7 series IP or DisplayPort IP?

Neither.

 

and can you use up-to 10 Gbps line late on Display Port?

The hardware I have currently available doesn't allow for 10 Gbps line rate.

 

Best,

Herbert

-------------- Yes, I do this for fun!
Visitor eunchong
Visitor
2,303 Views
Registered: ‎07-16-2017

Re: IIBERT 7 via DisplayPort 1.2 Card

Jump to solution

Hi @hpoetzl,

 

Thanks very quick replying! We are surprised that you don't use both IP but can do eye scan. How do you do eye scan? is it your own code?

 

eunchong

0 Kudos
Voyager
Voyager
2,298 Views
Registered: ‎06-24-2013

Re: IIBERT 7 via DisplayPort 1.2 Card

Jump to solution

Hey @eunchong,

 

Thanks very quick replying!

You're welcome!

 

We are surprised that you don't use both IP but can do eye scan.

I didn't say that I can do eye scans, although I can if I need to.

 

How do you do eye scan?

Eye scan with multi gigabit tranceivers is rather trivial. Simplified you have an offset (horizontally and vertically) to the sampling point and you just compare the result, do some statistics for each point and voila, eye scan diagram.

 

is it your own code?

Haven't written code for the Xilinx MGTs yet.

 

Hope this clarifies,

Herbert

-------------- Yes, I do this for fun!
0 Kudos