cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
puv97
Adventurer
Adventurer
235 Views
Registered: ‎01-28-2021

[BD 41-1075] No addresing paths found for assignment

Hi all !

 

I'm using the ZCU102 in Vivado 2020.1 and I have implemented the following IP block. In the top_pl I execute some unroll pragmas so the thing is: if I don't unroll the synthesis is OK, but if I unroll part of the code there are the errors shown after the image. Which is the problem ? Because the code is the same but with 2 unroll pragmas.

What can I do ? Thanks !

puv97_0-1625520112284.png

 

 

ERROR: [BD 41-1075] Cannot assign slave segment '/axi_fifo_mm_s_0/S_AXI/Mem0' into address space '/zynq_ultra_ps_e_0/Data' at address '0xA000_0000 [ 64K ]'. No addressing paths found for assignment.
ERROR: [BD 41-1075] Cannot assign slave segment '/axi_fifo_mm_s_0/S_AXI_FULL/Mem1' into address space '/zynq_ultra_ps_e_0/Data' at address '0xA001_0000 [ 64K ]'. No addressing paths found for assignment.
ERROR: [BD 41-1075] Cannot assign slave segment '/axi_fifo_mm_s_1/S_AXI/Mem0' into address space '/zynq_ultra_ps_e_0/Data' at address '0xA002_0000 [ 64K ]'. No addressing paths found for assignment.
ERROR: [BD 41-1075] Cannot assign slave segment '/axi_fifo_mm_s_1/S_AXI_FULL/Mem1' into address space '/zynq_ultra_ps_e_0/Data' at address '0xA003_0000 [ 64K ]'. No addressing paths found for assignment.

Tags (1)
0 Kudos
0 Replies