07-25-2019 09:21 AM
I want to run the logic simulation of Xilinx IP (MMCM). The simulation uses the batch mode of the modelsim.
Currently, the following command has been executed.
As a result, the following error is output:
** Error: ./clk_wiz_0_2/clk_wiz_0_sim_netlist.vhdl(15): (vcom-1598) Library "unisim" not found.
** Error: ./clk_wiz_0_2/clk_wiz_0_sim_netlist.vhdl(16): (vcom-1136) Unknown identifier "UNISIM".
I do not know the location of Library "unisim". Please tell me the storage place of "unisim".
For reference, I attached the following.
Error log (log.txt)
Simulation environment (sim.zip)
Project file (project_2.xpr.zip)
07-25-2019 01:18 PM
07-25-2019 06:50 PM
Did you run compile_simlib to pre-compile Vivado simulation libraries successfully? If yes, make sure you copy the generated modelsim.ini to the current simulation directory so that library are correctly mapped.
The source files for library "unisim" is located at Vivado install area:
07-26-2019 04:30 AM