UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Participant sulilittle
Participant
2,625 Views
Registered: ‎12-13-2011

unstable status

Hi,

I only simulate FIR function,the result is right.However,when I add the module into the project,I simulate the whole project,the result of the FIR is not right.It is about twenty of the result is unstable status.Why ? 

 

0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
2,620 Views
Registered: ‎08-02-2011

Re: unstable status

Are you sure you're feeding the data into the FIR that you think you are? How about the outputs... are you sure you're probing the right parts?

 

You will have to provide some data for us to provide more specific help. I.e. design, simulation plots, etc

www.xilinx.com
0 Kudos