UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
5,377 Views
Registered: ‎06-29-2009

ICAP instructions in Spartan6

Hi,

 

I was looking for a document or so,  where I could find the instructions/commands of ICAP for spartan6.  It will be used in VHDL (no HWICAP IP).

 

Untill now I find those two ducuments most informing for what I would like to use.

 -   SP601 and multiboot                  :  xtp038.pdf

 -   Multiboot with virtex5 FPGA ...    :  XAPP1100.PDF

 -   (I found more looong docs, but  it seemed about partial reconfig ...    (I did not read that document))

Are there more commands, or just those? 

 

What I was most interested in :   What is the watchdog for the ICAP about (I read it in xtp038.pdf)  .    Is it like:   you reboot from a new bitfile  ,  and that new bitfile has to give a signal to ICAP or else it will boot from the golden image?  Or was it ment with a separated process to be used in partial reconfig?

If yes,  where could I find more info on how to implement this?

 

Thanx,

 

 

Serge

 

 

 

0 Kudos
1 Reply
5,329 Views
Registered: ‎06-29-2009

Re: ICAP instructions in Spartan6

0 Kudos