01-12-2010 03:32 AM
01-13-2010 07:10 PM
My custom board uses a Micron MT48LC16M8A2 with the Spartan XC3S700A FPGA running at 50MHz and that is working well.
Obviously you will need to find a SDRAM controller that handles SDR SDRAM. I am using the MicroBlaze CPU so the obvious choice for me was the Xilinx mpmc core. For a CPU-less design, check out opencores.org as mentioned above.
For pin assignments basically I grouped the data / clock lines on one 3.3 volt bank and address / control lines on another.
01-13-2010 08:55 PM - edited 01-13-2010 08:57 PM
Thank you kurgan. The memory used is similar to the one i'm trying to use. I have downloaded the v files.
Thanks Jim. I am trying to use it with a Blackfin processor. I just wanted to know if PC133 was supported by the FPGA. I Got my answer.