cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
4,536 Views
Registered: ‎09-23-2011

Spartan6 MIG compatibility with ISSI DDR

Jump to solution

Have anyone had successful interfacing ISSI DDR 3 with Spartan 6 ? I know I can use custom part in MIG-core gen and the timings are well within the base range listed. Just wanted to hear from users who were successful or is there any special attention needed for using the DDR not listed in the Xilinx supported memory.

 

Thanks

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Xilinx Employee
Xilinx Employee
7,449 Views
Registered: ‎07-11-2011

Re: Spartan6 MIG compatibility with ISSI DDR

Jump to solution

Hi,

 

The parts not listed in MIG GUI drop down are not hardware evaluated by Xilinx.

But I have seen few customers used ISSI parts successfully.

You just need to take care that you have given all the timing parameters of ISSI part while custom part generation.

Make sure behavioural simulation is successfull and and then go for  HW.

 

Hope this helps

 

 

Regards,

Vanitha

---------------------------------------------------------------------------------------------
Please do google search before posting, you may find relavant information.
Mark the post - "Accept as solution" and give kudos if information provided is helpful and reply oriented

View solution in original post

0 Kudos
1 Reply
Highlighted
Xilinx Employee
Xilinx Employee
7,450 Views
Registered: ‎07-11-2011

Re: Spartan6 MIG compatibility with ISSI DDR

Jump to solution

Hi,

 

The parts not listed in MIG GUI drop down are not hardware evaluated by Xilinx.

But I have seen few customers used ISSI parts successfully.

You just need to take care that you have given all the timing parameters of ISSI part while custom part generation.

Make sure behavioural simulation is successfull and and then go for  HW.

 

Hope this helps

 

 

Regards,

Vanitha

---------------------------------------------------------------------------------------------
Please do google search before posting, you may find relavant information.
Mark the post - "Accept as solution" and give kudos if information provided is helpful and reply oriented

View solution in original post

0 Kudos