UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor slhcxtk
Visitor
441 Views
Registered: ‎02-24-2017

prmitives

Jump to solution

hello,

    what's the difference between component primitives and native primitives?

    Does each primitive corresponds to the real hardware logic?

 

   I've been confused on this for a long time. Thanks!

 

Tags (1)
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Community Manager
Community Manager
629 Views
Registered: ‎08-08-2007

Re: prmitives

Jump to solution

Native Mode = RX_BITSLICE, TX_BITSLICE. BITSLICE_CONTROL and you should use the High Speed Selectio Wizard for your design entry.

Component Mode = ISERDES, OSERDES, IDDR, ODDR, IDELAY, ODELAY, IDELAYCTRL and you use RTL as you design entry method.

 

The ISERDES+ IDELAY has a similiar functionality as the RX_BITSLICE, in that you capture serial data and output a parallel bus but how its implemented is different in the FPGA so the Native Mode has higher performance. 

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
1 Reply
Highlighted
Community Manager
Community Manager
630 Views
Registered: ‎08-08-2007

Re: prmitives

Jump to solution

Native Mode = RX_BITSLICE, TX_BITSLICE. BITSLICE_CONTROL and you should use the High Speed Selectio Wizard for your design entry.

Component Mode = ISERDES, OSERDES, IDDR, ODDR, IDELAY, ODELAY, IDELAYCTRL and you use RTL as you design entry method.

 

The ISERDES+ IDELAY has a similiar functionality as the RX_BITSLICE, in that you capture serial data and output a parallel bus but how its implemented is different in the FPGA so the Native Mode has higher performance. 

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------