cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
moon5756
Explorer
Explorer
341 Views
Registered: ‎09-05-2015

ZCU216 ADC/DAC spec

Jump to solution
On page 78 in ug1390(ZCU216 Evaluation Board user guide), it says
 
○ 2 ADC inputs – compression mount SMAs through low frequency baluns – Minicircuits
TCM2-33WX+
○ 2 ADC inputs – compression mount SMAs through mid frequency baluns – Anaren
BD1631J50100AHF
○ 2 ADC inputs – compression mount SMAs through high frequency baluns – Anaren
BD3150N50100AHF
○ 2 ADC inputs - compression mount SMAs through high freq baluns – Anaren
BD4859N50100AHF
 
These add up to only 8 ADC inputs while ZCU216 is advertised to support 16ADC/16DAC. Does 2 ADCs have to be 4 ADCs instead in the documentation? (typo?)
 
Thanks in advance.
Tags (1)
0 Kudos
1 Solution

Accepted Solutions
pthakare
Moderator
Moderator
319 Views
Registered: ‎08-08-2017

Hi @moon5756 

With ZCU216 we also provide XM650 (16T16R N79 band loopbank add on card)

pthakare_0-1613372990699.png

But if you want facilitate 16ADCs without loopback from DAC-ADC , you need different customer add on card 

-------------------------------------------------------------------------------------------------------------------------------
Reply if you have any queries, give kudos and accept as solution
-------------------------------------------------------------------------------------------------------------------------------

View solution in original post

3 Replies
pthakare
Moderator
Moderator
330 Views
Registered: ‎08-08-2017

Hi @moon5756 

Its not Typo , For ZCU216, only 8 ADC channels are connected to Baluns

pthakare_0-1613372122447.png

The XM655 is common for ZCU208 (ZCU208 has 8 ADCs)  and ZCU216,

Breakout card XM655 Schematics you can refer to for details on this

https://www.xilinx.com/products/boards-and-kits/zcu216.html#documentation

 

-------------------------------------------------------------------------------------------------------------------------------
Reply if you have any queries, give kudos and accept as solution
-------------------------------------------------------------------------------------------------------------------------------
moon5756
Explorer
Explorer
323 Views
Registered: ‎09-05-2015

Hi, @pthakare 

Thanks for the prompt reply. Do I need a different add-on card to facilitate ZCU216's 16 ADCs?

0 Kudos
pthakare
Moderator
Moderator
320 Views
Registered: ‎08-08-2017

Hi @moon5756 

With ZCU216 we also provide XM650 (16T16R N79 band loopbank add on card)

pthakare_0-1613372990699.png

But if you want facilitate 16ADCs without loopback from DAC-ADC , you need different customer add on card 

-------------------------------------------------------------------------------------------------------------------------------
Reply if you have any queries, give kudos and accept as solution
-------------------------------------------------------------------------------------------------------------------------------

View solution in original post