UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer sxmman
Observer
317 Views
Registered: ‎05-31-2012

about power supply type for xczu7eg

Jump to solution

which type should i choose, ldo or dc?

i have also learned the SCH of ZCU106, and found that using ldo for Vps_mgtravcc(gth in ps) but dc regulator for Vmgtavcc(gth in pl). it made me confused and could Xilinx give some advise on this topic?

by the way, the ds925 give a power on sequencing which don't include GTH in pl, can i ramp up power supply GTH in pl in any time?

thanks.

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
251 Views
Registered: ‎08-25-2010

回复: about power supply type for xczu7eg

Jump to solution

Hi @sxmman,

 Each of these types of regulators has advantages and disadvantages.The optimal choice of regulator type depends on system requirements such as:

• Physical size
• Thermal budget
• Power efficiency
• Cost

Please see more detail on page 328, ug576:

http://www.xilinx.com/support/documentation/user_guides/ug576-ultrascale-gth-transceivers.pdf

 

Regarding power sequence for GTH in PL, please see page 14, ds925:

The recommended power-on sequence to achieve minimum current draw for the GTH or GTY transceivers is
VCCINT, VMGTAVCC, VMGTAVTT OR VMGTAVCC, VCCINT, VMGTAVTT. There is no recommended sequencing for
VMGTVCCAUX. Both VMGTAVCC and VCCINT can be ramped simultaneously. The recommended power-off sequence
is the reverse of the power-on sequence to achieve minimum current draw.

 

Thanks
Simon
-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
252 Views
Registered: ‎08-25-2010

回复: about power supply type for xczu7eg

Jump to solution

Hi @sxmman,

 Each of these types of regulators has advantages and disadvantages.The optimal choice of regulator type depends on system requirements such as:

• Physical size
• Thermal budget
• Power efficiency
• Cost

Please see more detail on page 328, ug576:

http://www.xilinx.com/support/documentation/user_guides/ug576-ultrascale-gth-transceivers.pdf

 

Regarding power sequence for GTH in PL, please see page 14, ds925:

The recommended power-on sequence to achieve minimum current draw for the GTH or GTY transceivers is
VCCINT, VMGTAVCC, VMGTAVTT OR VMGTAVCC, VCCINT, VMGTAVTT. There is no recommended sequencing for
VMGTVCCAUX. Both VMGTAVCC and VCCINT can be ramped simultaneously. The recommended power-off sequence
is the reverse of the power-on sequence to achieve minimum current draw.

 

Thanks
Simon
-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos