cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Visitor
Visitor
4,722 Views
Registered: ‎08-01-2017

3G SDI to HDMI or CSI-2

Jump to solution

Hi all,

 

As I found, Xilinx XC6SLX25 can support convert HD SDI to MIPI CSI-2. So I have a question, does Xilinx have product support convert 3G SDI to HDMI or MIPI CSI-2?. Have any reference design for this part?. I attachted picture Auvidea product HD SDI to CSI-2 bridge use Xilinx XC6SLX25 FTG256B FPGA.

 

Best regards,

Bang Duong

Tags (3)
HD SDI to CSI-2 Auvidea.PNG
0 Kudos
Reply
1 Solution

Accepted Solutions
Moderator
Moderator
5,244 Views
Registered: ‎11-09-2015

Hi @bangdd,

 

If everything is clear for you, please close the topic by marking a reply as accepted solution.

 

Thanks and Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

0 Kudos
Reply
5 Replies
Teacher
Teacher
4,701 Views
Registered: ‎07-09-2009
0 Kudos
Reply
Visitor
Visitor
4,662 Views
Registered: ‎08-01-2017

Thank you so much.

 

0 Kudos
Reply
Moderator
Moderator
4,638 Views
Registered: ‎11-09-2015

Hi @bangdd,

 

With FPGA you can basically do any connectivity to any connectivity.

 

We have a UHD-SDI IP (which can do up to 12G-SDI), a HDMI IP and a CSI-2 TX IP. This is the flexibility you get using FPGAs.

 

I would recommend to use at least a 7-series FPGA (one with Gigabit Tranceivers) as these IPs are not supported on Spartan-6.

 

You might want to contact a sales office to find the perfect fit for you.

 

Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
Reply
Moderator
Moderator
5,245 Views
Registered: ‎11-09-2015

Hi @bangdd,

 

If everything is clear for you, please close the topic by marking a reply as accepted solution.

 

Thanks and Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

0 Kudos
Reply
Visitor
Visitor
4,564 Views
Registered: ‎08-01-2017

Hi,

 

Sorry for reply late.

Thank you so much for your help.

 

Brs, 

Bang Duong

0 Kudos
Reply